All our engines are flow tested and dyno tuned with computer interfaced equipment.....NO fudging here! Your engine will include flow numbers and a dyno printout with graph. We are continually testing new ideas and products...stay tuned!!!
Click here to see the Ultimate Stock Appearing Engine
|
WKA - IKF
|
| R3 Senior Sportsman Stock (IKF) Claimer Class | $650 |
| R3 Gas Stock (IKF) | $750 |
| R3 Stock (WKA-IKF-Kart) | $975 |
| R3 Dual Bearing Stock | $1125 |
| R3 Dual Bearing Stock (built with the highest flowing block and carb combinations) | $1275 |
| R3 Dual Bearing National* Stock | $1675 |
| R3 Super Stock (WKA-IKF) | $1200 |
| R3 Dual Bearing Super Stock | $1350 |
| R3 Dual Bearing National* Super Stock | $1750 |
| R3 Limited Modified (WKA-IKF) | $1500 |
| R3 Dual Bearing Limited Modified | $1650 |
| R3 Dual Bearing National* Limited Modified | $2050 |
| R3 Controlled Stock (WKA-IKF) | $1300 |
| R3 Dual Bearing Controlled Stock | $1450 |
| R3 Dual Bearing National* Controlled Stock | $1850 |
| Blockzilla 14.5 Open Modified (WKA-IKF) HL380 carb, Ti valves, and lots of billet stuff | $3400 |
| Animal - Ready to bolt on and go (WKA) | $850 |
| Mild R3 Stock Appearing (.750" Raptor carb) | $1200 |
| Strong R3 Stock Appearing (.750 Raptor carb) | $1800 |
| Wild R3 Stock (almost) Appearing (.875 Funkart carb) | $2400 |
|
(There are too many combinations to list here
..... Call for more)
|
|
NHRA - IHRA
|
| 12.90 e.t. R3 - Std x Std - Jr. Drag | $750 |
| 11.90 e.t. R3 - .030 x Std - Jr. Drag | $1250 |
| 10.90 e.t. R3 - .080 x Std - Jr. Drag | $1975 |
| 9.90 e.t. Blockzilla - .140 x Std - Jr. Drag | $3000 |
| 8.90 e.t. Blockzilla - .140 x .563 - Jr. Drag | $3575 |
| 7.90 e.t. Blockzilla - 3 x 3 - Jr. Drag | $4600 |
 e.t.
Rhino or PM1 - 3.5 x 3 - Jr. Drag |
$6000 |
* Add $100 to any Raptor block for thick sleeve.
* National - These engines are the "pick of the litter" R3 dual bearing units (sometimes "J" or "M" blocks, and #2 or #4 carbs) that are rebuilt with max stroke crank, max ohm coil, max cut head, max pop-up, max seats, max magnet flywheel (balanced), etc.
| Engine Kit - R3 Stock (WKA-IKF) Inc. all machining and parts | $725 |
| Engine Kit - DB R3 Stock (WKA-IKF) Inc. all machining and parts | $875 |
All of our engines are seasoned and blueprinted. First thing is to port and flow the block so I'll know of its' potential value, then the machining begins.
•All Engines Include•
•Welded and chamfered lifter bore
•Valve guides installed and seats ground
•Valves trued and lapped
•Deck and cut head for maximum flow
•Align bored and precision honed with torque plate
•Valve spring pockets counterbored with spring tension set
•Crank, rod, and piston clearanced
•Blueprinted rings with squared gaps set
•Cam indexed and degreed with squared lash set
•Blueprinted and flowed carburetor matched to engine class
•Hard lobe cam and billet lifters
•Tank brace and carb brace on stockers
•Spark plug, boot, and chain guard
•Matched header to your class and track
•Filter adapter and throttle bellcrank
Note : All prices are subject to change.
