We are a full service machine shop. We can do all your machine work, provide blueprinted parts, short blocks, and/or kit engines... Let us know how we can help!
Labor Pricing
| Stock engine assembly (plus machining & parts) | $125 |
| Modified engine assembly (plus machining & parts) | $175 |
| Install intake and exhaust valve guides (includes stone cutting seats) | $45 |
| Install valve guides and lifter bushings | $65 |
| Align bore block (small bore) | $25 |
| Align bore block (large bore) | $30 |
| Precision hone | $25 |
| Weld lifter bore | $20 |
| Deck block | $15 |
| Angle deck block | $25 |
| Flow test block | $20 |
| Port and flow test block (stock) | $40 |
| Port modified | $80 |
| Bore, sleeve, deck, align bore, precision hone block | $135 |
| Set-up cam and springs | $55 |
| Stone cut seats | $6 |
| Spotface for springs | $4 |
| Chamfer lifter bores | $4 |
| Replace SRE guides | $20 |
| Install FM flywheel bushing in block | $35 |
| Drill oil hole in flywheel bushing | $3 |
| Install helicoil | $7 |
| Install keensert | $9 |
| Dyno engine ($5 for subsequent pulls) | $25 |
| Weigh-out kart | $25 |
| Set-up kart | $125 |
| Rebuild kart | $300 |
| Blueprint clutch (plus parts) | $45 |
| Blueprint your B&S carb for stock | $75 |
| Blueprint your Tilly for any class | $150 |
| Blueprint your B&S carb for controlled stock | $100 |
| Blueprint your B&S Raptor carb for stock appearing | $150 |
| Blueprint your FunKart carb for stock appearing | $200 |
| Replace stock seats (includes seats) | $40 |
| Replace oversize seats (includes seats- Beryllium extra) | $60 |
| Stone cut valves | $2 |
| Cut O.D. of valve and stone cut face | $8 |
**Note all prices are each and includes parts where applicable**
